Re: Required ports
Take a look at KB1012382 for the port requirements Basically you would need 80,443,902,903
View ArticleRe: Needing some mutliprotocol design advice!
Hi Andy, With regards to iSCSI, yes you should have one interface active and one as unused, in fact this is required for the VMKernel port bindings to work. For NFS, you can have two or more NICs set...
View ArticleRe: Vmware Fusion 4.1.4 with Win XP Pro - Freezes the Windows side with...
Hi, Thanks for the response. I've tested this with 1 and 2 processors (currently running just 1) with no positive change. I've allocated as much as 2GB of RAM (currently running 1536 MB ~ 1.5GB)...
View ArticleClik here to view.
Re: Memory Speed question!
1) Do a Googlesearch on the memory chips 2) The thing is that 32GB of 2400MHz memory is just as expensive as 64GB of 1600MHz, so is it worth it? Twice as much memory is p[robably (not the word...
View ArticleClik here to view.
Re: ESXi Lab Setup Problem...
Thanks André - I agree, the mac address conflict is causing the problem! I really don't know how on earth I have managed to do that!!? Anyway - I guess I need to chnage the mac on one of my ESXi...
View ArticleRe: Snapshot not showing in Snapshot Manager, but 0000002.vmdk still around
When we (you) moved the files to the backup folder only the file pointer (i.e. FAT entry) was modified, but the file itself was not accessed. There might still be a lock on this file or a possible VMFS...
View ArticleRe: ESXi Lab Setup Problem...
Did you do a fresh installation on each of the hosts or did you clone them somehow (or even switch NICs)? The MAC address for each NIC is supposed to be unique!? If the hosts only have a single NIC...
View ArticleRe: Problems using x2apic in Fusion 5.0.2 (900491)
Hi Doug, Thanks for following up. See inline for answers to some questions you asked. I don't believe that the behavior of programming the IOAPIC with legacy style entries is architecturally defined...
View ArticleClik here to view.
Re: ESXi Lab Setup Problem...
Its really odd!! Thinking back, I had loads of problems getting ESX to install on one of the servers because it had on-board RAID and 4 disks - and the ESX install had a problem seeing a volume to...
View ArticleSufficient Privileges to install View Connection Server
Hello having trouble installing View Connection Server. I followed the directions listed...
View ArticleAttributes on an Object?
If I have a object in Orchestrator such as a vAppNetwork, how do I find the methods and attributes for that object?I can't seem to find this documented anywhere. -david-
View ArticleRe: Sufficient Privileges to install View Connection Server
Welcome to the forums. What kind of error messages are you receiving?
View ArticleClik here to view.
Re: Attributes on an Object?
Hi David, just check the API Explorer or Search best regardsChristian
View ArticleRe: Sufficient Privileges to install View Connection Server
The currently logged in user does not have sufficient privileges on the existing Directory Services instance. please log in as a user with full administrator rights and then retry this installation....
View ArticleRe: Sufficient Privileges to install View Connection Server
Got it! I went into system services and stopped the VMWare LDAP Direcoty Service, and then ran the install again...I'll report back any other errors.
View ArticleRe: ESXi Lab Setup Problem...
Just found http://kb.vmware.com/kb/1031111 which might help resolving the MAC address issue without a re-installing the host. André
View ArticleRe: Needing some mutliprotocol design advice!
highlandclinic1 wrote: OK guys, I have created a drawing based on how I understand your posts. If you would be so kind, please look it over and see if you can find any errors, and also see further...
View Article